Thiết bị chuyển mạch Switch Ruijie RG-CS83-12GT4XS-P
- RG-CS83-12GT4XS-P,12-Port GE Layer 3 Switch Access có thể quản lí hỗ trợ PoE+
- 12 x GE electrical ports
- 4x 10GE SFP+ ports
- POE+
HPE 1820-48G Switch J9981A
Switch HPE OfficeConnect 1820 48G J9981A
Thiết bị chuyển mạch HPE 1820 48G J9981A là Switch 48 Port Gigabit và 4 Port SFP 1G
- Phần cứng mạnh mẽ: Bộ xử lý ARM Cortex-A9 @ 400 MHz, cùng SDRAM 128MB
- Khả năng xử lý gói tin cao: Throughput lên đến 77.3Mp/s, Switching capacity: 104Gb/s, MAC address table size: 16000 entries
- Sở hữu các tính năng của Switch Layer 2 như: VLAN Support, Jumbo packet Support, IGMP snooping, Loop protection, QoS ( Traffic prioritization, Broadcast control IEEE 802.1p/Q), STP, RSTP, Link aggregation,...
- Lắp đặt tủ rack dễ dàng ( cao 1U)
HPE 2530-24G-PoE Switch J9773A
HPE 2530-24G-PoE Switch J9773A
– Fixed Port Layer-2 Managed Ethernet Switch.
– 24 RJ-45 autosensing 10/100/1000 PoE ports, 4 dual-personality ports; RJ-45 10/100/1000 or SFP slot
HPE 2530-8-PoE+ Switch J9780A
HPE 2530-8-PoE+ Switch J9780A
– Fixed Port Layer-2 Managed Ethernet Switch.
– 8 RJ-45 autosensing 10/100 PoE ports, 2 dual-personality ports; RJ-45 10/100/1000 or SFP slot.
Features
Quality of Service (QoS)
– Traffic prioritization (IEEE 802.1p): allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)
– Simplified QoS configuration: Port-based: prioritizes traffic by specifying a port and priority level. VLAN-based: prioritizes traffic by specifying a VLAN and priority level.
– Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
– Rate limiting: sets per-port ingress enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic
– Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
Management
– Choice of management interfaces: Web graphical user interface (GUI): HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): provides advanced configuration and diagnostics through a robust CLI. Simple Network Management Protocol (SNMPv1/v2c/v3): allows a switch to be managed with a variety of third-party network management applications.
– Virtual stacking: provides single IP address management for up to 16 switches
– sFlow (RFC 3176): delivers wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers
– IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automates device discovery protocol for easy mapping by network management applications
– Logging: provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
Connectivity
– IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
– IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras
– IEEE 802.3at Power over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE/PoE+-powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/tilt/zoom security cameras (see product specifications for total PoE power available)
– Auto-MDIX: adjusts automatically for straight-through or crossover cables on all ports
– Pre-standard PoE support: detects and provides power to pre-standard PoE devices
Layer 2 switching
– VLANs: provides support for 512 VLANs and 4,094 VLAN IDs
– Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data transfers; 8- and 24-port Fast Ethernet models automatically support up to 2000-byte frames with no configuration needed
– 16K MAC address table: provides access to many Layer 2 devices
– GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
– Per-VLAN Spanning Tree Plus (PVST+): allows each VLAN to build a separate spanning tree to improve link bandwidth usage in network environments with multiple VLANs
Specifications
| I/O ports and slots | 8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: half or full | |
| 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-Tx; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports | ||
| 1 dual-personality (RJ-45 or USB micro-B) serial console port | ||
| Physical characteristics | Dimensions | 10(w) x 6.28(d) x 1.75(h) in (25.4 x 15.95 x 4.45 cm) (1U height) |
| Weight | 2.0 lb (0.91 kg) | |
| Memory and processor | Processor | ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated |
| Mounting | Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting | |
| Performance | IPv6 Ready Certified | |
| 100 Mb Latency | < 1.3 µs (LIFO 64-byte packets) | |
| 1000 Mb Latency | < 2.3µs (LIFO 64-byte packets) | |
| Throughput | up to 4.1 million pps (64-byte packets) | |
| Switching capacity | 5.6 Gbps | |
| MAC address table size | 16000 entries | |
| Environment | Operating temperature | 32°F to 113°F (0°C to 45°C) |
| Operating relative humidity | 15% to 95% @ 104°F (40°C), noncondensing | |
| Non-operating/ | -40°F to 158°F (-40°C to 70°C) | |
| Storage temperature | ||
| Non-operating/Storage relative humidity | 15% to 90% @ 149°F (65°C), noncondensing | |
| Altitude | up to 10,000 ft (3 km) | |
| Acoustic | Power: 0 dB, Pressure: 0 dB | |
| Electrical characteristics | Frequency | 50/60 Hz |
| Maximum heat dissipation | 29 BTU/hr (30.6 kJ/hr), (switch only: 29 BTU/hr; | |
| combined switch + max. PoE devices: 262 TU/hr) | ||
| AC voltage | 100-127/200-240 VAC | |
| Current | 1.4 A | |
| Maximum power rating | 76.7 W | |
| Idle power | 5.8 W | |
| PoE power | 67 W | |
| Safety | UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1 | |
| Emissions | FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A | |
| Immunity | Generic | EN 55024, CISPR 24 |
| EN | EN 55024, CISPR 24 | |
| ESD | IEC 61000-4-2 | |
| Radiated | IEC 61000-4-3 | |
| EFT/Burst | IEC 61000-4-4 | |
| Surge | IEC 61000-4-5 | |
| Conducted | IEC 61000-4-6 | |
| Power frequency magnetic field | IEC 61000-4-8 | |
| Voltage dips and interruptions | IEC 61000-4-11 | |
| Harmonics | EN 61000-3-2, IEC 61000-3-2 | |
| Flicker | EN 61000-3-3, IEC 61000-3-3 | |
| Management | IMC – Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB); | |
| IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB | ||
| Notes | IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only. When using SFPs with this product, SFPs with revision ‘B’ or later (product number ends with the letter ‘B’ or later, e.g., J4858B, J4859C) are required. | |
HPE 1920-8G Switch JG920A
HPE 1920-8G Switch JG920A
– The HP 1920 Switch Series, part of the HP OfficeConnect portfolio, is designed for smaller organizations dealing with bandwidth-demanding applications. The switches are ideal for environments that require advanced features for granular control and where smart-managed flexibility is a must for easy network configuration and management.
– The switches deliver advanced smart-managed fixed configuration Gigabit switches that build on the marketing-leading price/performance of the HP 1910 Switch Series. They feature a new 48-port PoE+ model, IPv6 support and advanced silicon technology.
Features
– Simplifies Network Deployment and Management for Small Organizations
– The HP 1920 Switch Series, ideal for small organizations features easy-to-use, out of the box, plug-and-play deployment.
– The series offers a complete portfolio of choices for increased flexibility. It consists of nine rack-mountable models with internal power supplies including four non-Power over Ethernet (PoE) models: 8G-, 16G-, 24G- and 48G- port; five PoE+ models: (2) 8G-, (2) 24G- and 48G-port.
– These smart-managed switches use an intuitive Web management interface, based on our industry-leading HP 1910 Switch Series, to simplify deployment and management while offering you greater granularity of control of key features.
Keeps Your Business up and Running and Protected
– The HP 1920 Switch Series with upgraded models and options is built on the market-leading, proven reliability of the HP 1910 Switch Series with advanced silicon technology for lower power consumption and an enhanced feature set for more robust operation.
– Enhanced security features such as Access Control List, IEEE 802.1x and VLANs guard your network from unwanted or unauthorized access.
– Management security restricts access to critical configuration commands, offers multiple privilege levels with password protection and supports secure http (https).
Delivers Improved Performance, While Lowering the Total Cost of Ownership
– The HP 1920 Switch Series delivers advanced functionality in smart-managed switches, including Layer 3 static routes, SFP ports, IPv6 support, rate limiting, link aggregation and IGMP.
– Smaller enclosures facilitate flexible deployment.
– The switch series includes PoE+ options to power IP devices without the cost of additional cabling.
– Advanced silicon technology, green features like Port shutdown and EEE compliance for greater energy-efficiency and the Limited Lifetime Warranty significantly reduce TCO.
Specifications
| Differentiator | 8-port gigabit advanced smart managed switch with 2 GbE SFP ports |
| Ports | 8 RJ45 auto-negotiating 10/100/1000 ports |
| 2 SFP 1000 Mbps ports | |
| Supports a maximum of 8 autosensing 10/100/1000 ports plus 2 1000BASE-X SFP ports, or a combination | |
| Memory and processor | MIPS @ 500 MHz |
| 32 MB flash | |
| packet buffer size: 4.1 KB | |
| 128 MB RAM | |
| Latency | 100 Mb Latency: < 5 µs |
| 1000 Mb Latency: < 5 µs | |
| Throughput | Up to 14.8 Mpps |
| Routing/ Switching capacity | 20 Gbps |
| Minimum dimensions | 26.6 x 16.2 x 4.4 cm |
| Weight | 0.9 kg |
Bộ định tuyến, Router Ruijie RG-EG210G-P
– 10 cổng 1000BASE-T ports (mặt định là 9 LAN và 1 cổng WAN).
– Hỗ trợ cấp nguồn PoE (LAN 0-7) chuẩn 802.3af/at với tổng công suất 70W
– Hỗ trợ kết nối lên đến 4 cổng WAN (khi chuyển đổi cổng LAN 6,7,8 thành WAN)
– RAM: 256M | Flash: 16MB
– Hỗ trợ 200 user
– Dễ dàng quản lý và cấu hình qua Ruijie cloud
– Flow control, Behavior management, Traffic Audit
– Hỗ trợ 8 kênh VPN (IPsec)
Bộ định tuyến, Router Ruijie RG-EG210G-E
– Dòng Smart Gateway bắt tủ rack
– 10 cổng 10/100/1000MBASE-T ports (mặc định là 9 cổng LAN và 1 cổng WAN)
– Hỗ trợ kết nối lên đến 4 cổng WAN (khi chuyển đổi LAN7, LAN8, LAN6 thành WAN)
– RAM: 256M | Flash: 16MB
– Hỗ trợ cùng lúc 200 user
– Hỗ trợ bắt tủ rack
– Băng thông 1Gbps
– Dễ dàng quản lý và cấu hình qua Ruijie Cloud
Bộ định tuyến, Router Ruijie RG-EG105G V2
– 5 cổng 10/100/1000M Base-T (mặc định là 4 cổng LAN và 1 cổng WAN)
– Hỗ trợ kết nối lên đến 2 cổng WAN (khi chuyển đổi LAN 3 thành WAN1)
– RAM: 128M | Flash: 16MB
– Hỗ trợ đồng thời 100 user
– Dễ dàng quản lý và cấu hình qua Ruijie Cloud
– Tính năng quản lý Wifi: cho phép quản lý đến 300 bộ phát wifi khi ở chế độ AC, và quản lý đến 32 AP khi ở chế độ Gateway
– Flow control, Behavior management, Traffic Audit
– Hỗ trợ 8 kênh VPN (IPsec)
– Hỗ trợ các tính năng như: DHCP, PPPoE dial-up, Static Routing, Policy-based routing, load balancing, ACL, IP-MAC binding, MAC Filter, NAT, NATPT, Port Mapping, DNS, DDNS, NTP, TFTP,..
– Cân bằng tải giữa các đường truyền internet.
– Hỗ trợ cập nhật thư viện signature của các ứng dụng mobile/windows (facebook, youtube, torrent..) để quản lý/ngăn chặn.
– Nguồn 220VAC~,50-60Hz
– Kích thước: 206.5×108.5×28 (mm)
– Nhiệt độ hoạt động: 0°C~40°C
Bộ định tuyến, Router Ruijie RG-EG105G
– 5 cổng 1000BASE-T ports (mặc định là 4 cổng LAN và 1 cổng WAN)
– Hỗ trợ kết nối lên đến 2 cổng WAN (khi chuyển đổi LAN 3 thành WAN)
– RAM: 128M | Flash: 16MB
– Hỗ trợ 100 user
– Dễ dàng quản lý và cấu hình qua Ruijie cloud
– Cân bằng tải giữa các đường truyền internet.
Thiết bị chuyển mạch Ruijie RG-NBS3100-24GT4SFP
– Bộ chuyển mạch không PoE 28 cổng gigabit Lớp 2 được quản lý, 4 đường lên SFP
– Chất lượng cấp doanh nghiệp đảm bảo hiệu suất cao
– Nhận dạng camera IP, giá trị duy nhất cho mạng CCTV
– Nhiều chính sách bảo mật Bảo vệ mạng của bạn
– Quản lý trọn đời trên Ruijie Cloud mọi lúc mọi nơi
Thiết bị chuyển mạch Ruijie RG-ES209GC-P
– Layer 2 Smart Managed PoE Switch 9 Cổng 10/100/1000BASE-T công suất 120W.
– 8 cổng 10/100/1000M PoE/PoE+ tổng công suất 120W.
– 1 cổng 10/100/1000M uplink.
– Tốc độ chuyển mạch: 18Gbps.
– MAC: 2K.
– Dễ dàng quản lý và cấu hình qua Ruijie cloud
– Tích hợp Web management
Thiết bị chuyển mạch Ruijie RG-ES205GC-P
– Layer 2 Smart Managed PoE Switch 5 Cổng 10/100/1000BASE-T công suất 54W
– 4 cổng 10/100/1000M PoE/PoE+ tổng công suất 54W
– 1 cổng 10/100/1000M uplink
– Tốc độ chuyển mạch: 10Gbps
– MAC: 2K
– Dễ dàng quản lý và cấu hình qua Ruijie cloud
– Tích hợp Web management